HP Officejet 4300


HP Officejet 4300 Printer Tech Support

  • HP Officejet 4300 Driver Download
  • HP Officejet 4300 Software Download
  • HP Officejet 4300 Wireless Setup
  • HP Officejet 4300 Ink Cartridges Install
  • HP Officejet 4300 Troubleshooting

HP Officejet 4300 Printer Model

HP Officejet 4300

HP Officejet 4300 Ink Cartridges

How to check the estimated ink levels from the printer’s control panel?

  1. Slide your fingers across the control panel screen and then select Setup.
  2. Choose Tools from the options listed and then tap on Display Estimated Ink Levels.

How to replace the HP Officejet 4300 ink cartridges?

  1. Ensure that your 123 HP Setup 4300 printer is switched on.  
  2. Open the access door of the ink cartridge.
  3. To release the ink cartridge, press the front of the cartridge and then remove it gently from the slot.
  4. Unpack the new ink cartridges.
  5. Slide in the ink cartridges according to the colors until you have installed the cartridges carefully in its place.
  6. Repeat the above mentioned steps for all the ink cartridges.
  7. After installing your ink cartridges, close the access door.Driver download from 123.hp.com/oj4300 or 123.hp.com/setup 4300.

HP Officejet 4300 Wireless Setup


Without connecting to a wireless network, one can print wirelessly with the use of 123 HP wireless direct in their HP Officejet 4300 printer.

How to print from a wireless-capable computer (Windows)?

  1. Ensure that the HP Wireless Direct option is switched on.
  2. Now, the Wi-Fi connection on your printer needs to be switched on.
  3. From your computer, connect to a new network as you usually do.
  4. Choose the wireless network you would to connect to.
  5. When prompted, enter the security code for the network.
  6. If your printer uses the network through an USB connection, then do the following.
    1. Based on the operating system you use, do the following,
      1. Windows 8: Start – – > app bar – – > All Apps – – > Printer Name – – > Utilities.
      2. Windows 7, Windows Vista and Windows XP: Start – – > All Programs – – > HP – – > Printer Folder.
    2. Choose Printer Setup & Software and then tap on Connect a new printer.
    3. Select Wireless option in the Connection Option dialog box. From the list displayed, choose the HP printer software.
    4. Now, follow the on-screen instructions to complete the process.
  7. Print the document that you need to.

HP Officejet 4300 Driver Install

  1. Switch on the 123 HP Officejet 4300
  2. Connect the printer to the PC with the USB cable.
  3. If the OS is Windows 10, then the built in software will automatically detect the OS.
  4. The built in software will start downloading the driver software into your system.
  5. Follow the instructions that appears in the screen to complete the installation process.
  6. For further assistance hp.com/setup.
  7. If it is some other Windows OS follow the steps below.
  8. Power on your 123 HP Officejet 4300
  9. Connect the cable to the system and printer and place them close to each other.
  10. If your system and printer are connected properly, the system detects the 123 HP Officejet 4300 Printer.Driver download from 123.hp.com/oj4300 or 123.hp.com/setup 4300.

HP Officejet 4300 Troubleshooting

When paper is not picked up from a tray

  1. Ensure that enough paper is placed in the input tray.
  2. The paper-width guides should be adjusted to the size of the paper you are loading.
  3. It is important that the guides should hold the stack of paper and should not be tight.
  4. The papers in the tray should not be curled.
  5. Uncurl the paper by twisting it in the opposite direction.

When pages are skewing

  1. The paper loaded in the tray should be aligned with the paper-guides. If not, reload the paper and adjust the paper width guides.
  2. Load the paper or envelope to the paper tray only when it is not printed.
  3. If necessary, remove and replace the duplexer.

When multiple pages are being picked up

  1. The paper width guides should be adjusted according to the size of the paper you are loaded. The guides should not be tight.