HP Officejet 4000 Troubleshooting


HP Officejet 4000 Troubleshooting

When paper is not picked up from a tray

  1. Ensure that enough paper is placed in the input tray.
  2. The paper-width guides should be adjusted to the size of the paper you are loading.
  3. It is important that the guides should hold the stack of paper and should not be tight.
  4. The papers in the tray should not be curled.
  5. Uncurl the paper by twisting it in the opposite direction.

When pages are skewing

  1. The paper loaded in the tray should be aligned with the paper-guides. If not, reload the paper and adjust the paper width guides.
  2. Load the paper or envelope to the paper tray only when it is not printed.
  3. If necessary, remove and replace the duplexer.

When multiple pages are being picked up

  1. The paper width guides should be adjusted according to the size of the paper you are loaded. The guides should not be tight.
  2. Your input tray should not be overloaded with paper.
  3. Use of HP paper will guarantee you optimum performance and efficiency.

When the printer cannot read the memory device

  1. The memory device you have enters should support the HP Officejet 4000 printer.
  2. It should be fixed into the slot properly.
  3. Ensure that the switch in the memory device is set in the position so that the content in it can be read.